HP Comware 5 Debug Manual Vol 2

Field
Description
[SA: Len=sa-len
[Proposal: prop-seq Protocol-ID=protocol-id,
Trans-num=num, Prop-len=prop-len, SPI= spi-value
[Transform: trans-seq Trans-type=trans-type,
Trans-ID=trans-id, [Attr-type= Attr-type
Attr-value=keylen-val] ] ]
IKEv2 SA payload information, which includes multiple
IKEv2 proposals and multiple transform sets:
• Len—SA payload length.
• Proposal—IKEv2 proposal sequence number.
• Protocol-ID—IKE, AH, or ESP.
• Trans-num—Number of transform sets.
• Prop-len—Proposal length.
• SPI—SPI value in hexadecimal notation.
• Transform—Transform set sequence number.
• Trans-type—Transform set type, which can be
ENCR, PRF, INTEG, D-H, and ESN.
• Trans-ID—Transform set ID. Different transform set
types have different transform set IDs, including:
 DES
 3DES
 AES_CBC
 AES_CTR
 ENCR_CAMELLIA_CBC
 HMAC_MD5
 HMAC_SHA2_256
 HMAC_SHA1
 AES128_XCBC, AES-XCBC, HMAC_SHA ,
HMAC_SHA256, MODP768, MODP1024,
MODP1536, and MODP2048.
• Attr-type—Attribute type, which can only be Key
Length.
• Attr-value—Attribute value.
[KE: Len=ke-len Group-ID=group-id]
KE payload information:
• Len—KE payload length.
• Group-ID—DH group ID.
[Nonce: Len=nonce-len] Nonce payload length.
176