HP Comware 5 Debug Manual Vol 2

Field
Description
[N: Protocol-ID=protocol-id, Notify-type= Notify-type
]
Notify message payload information:
• Protocol-ID—The value can be 0, AH, or ESP.
• Notify-type—Notify message payload type:
 UNSUPPORTED_CRITICAL_PAYLOAD.
 INVALID_IKE_SPI.
 INVALID_MAJOR_VERSION.
 INVALID_SYNTAX.
 INVALID_MESSAGE_ID.
 INVALID_SPI.
 NO_PROPOSAL_CHOSEN.
 INVALID_KE_PAYLOAD.
 AUTHENTICATION_FAILED.
 SINGLE_PAIR_REQUIRED.
 NO_ADDITIONAL_SAS.
 INTERNAL_ADDRESS_FAILURE.
 FAILED_CP_REQUIRED.
 TS_UNACCEPTABLE.
 INVALID_SELECTORS.
 TEMPORARY_FAILURE.
 CHILD_SA_NOT_FOUND.
 INITIAL_CONTACT.
 SET_WINDOW_SIZE.
 ADDITIONAL_TS_POSSIBLE.
 IPCOMP_SUPPORTED.
 NAT_DETECTION_SOURCE_IP.
 NAT_DETECTION_DESTINATION_IP.
 COOKIE.
 USE_TRANSPORT_MODE.
 HTTP_CERT_LOOKUP_SUPPORTED.
 REKEY_SA.
 ESP_TFC_PADDING_NOT_SUPPORTED.

NON_FIRST_FRAGMENTS_ALSO.
[IDi: Len=IDi-len value]
Initiator ID payload information:
• Len—Initiator ID payload length.
• value—Initiator ID payload value.
[IDr: Len=IDr-len value]
Responder ID payload information:
• Len—Responder ID payload length.
• value—Responder ID payload value.
[CERT: Len=cert-len] Certificate payload length.
[CERTREQ: Len=certreq-len] Certificate request payload length.
[AUTH: Len=auth-len Auth-method=auth-method]
AUTH message payload information:
• Len—AUTH message payload length.
• Auth-method—Authentication method, which can
be PSK or RSA-SIG.
177