HP Comware 5 Debug Manual Vol 2

20.00% packet loss
round-trip min/avg/max = 1/27/70 ms
# Enable IKEv2 error debugging. When you configure IKEv2 on the device, output similar to the
following example is generated:
<Sysname> debugging ikev2 error
*Mar 11 15:44:48:860 2011 Sysname IKEV2/7/DEBUG: IKE_AUTH[R] Msg_Receive: Failed to f
ind IKEv2 profile.
*Mar 11 15:44:49:828 2011 Sysname IKEV2/7/DEBUG: IKE_AUTH[R] Msg_Receive: Failed to f
ind IKEv2 profile.
*Mar 11 15:44:51:828 2011 Sysname IKEV2/7/DEBUG: IKE_AUTH[R] Msg_Receive: Failed to f
ind IKEv2 profile.
// The responder failed to find the IKEv2 profile.
# Enable IKEv2 event debugging. When you configure IKEv2 on the device, output similar to the
following example is generated:
<Sysname> debugging ikev2 event
*Mar 11 15:54:31:625 2011 Sysname IKEV2/7/DEBUG: Reclaiming child SA: ID 16, type IPS
ECSA.
*Mar 11 15:54:31:625 2011 Sysname IKEV2/7/DEBUG: Reclaiming child SA: ID 17, type IPS
ECSA.
*Mar 11 15:54:31:625 2011 Sysname IKEV2/7/DEBUG: Reclaiming child SA: ID 18, type IPS
ECSA.
*Mar 11 15:54:31:625 2011 Sysname IKEV2/7/DEBUG: Reclaiming child SA: ID 19, type IPS
ECSA.
*Mar 11 15:54:31:625 2011 Sysname IKEV2/7/DEBUG: Reclaiming child SA: ID 20, type IPS
ECSA.
// Reclaimed child SAs of the IPsec SA type.
# Enable IKEv2 state machine debugging. When you configure IKEv2 on the device, output similar to the
following example is generated:
<Sysname> debugging ikev2 fsm
*Mar 11 15:57:05:204 2011 Sysname IKEV2/7/DEBUG:
CHILD SA[IPSECSA], [I], ID:21,
Local:111.0.0.1,Remote:111.0.0.2
IDLING->GETSPI
Parent:0,5,5,5
*Mar 11 15:57:05:204 2011 Sysname IKEV2/7/DEBUG:
CHILD SA[IPSECSA], [I], ID:21,
Local:111.0.0.1,Remote:111.0.0.2
GETSPI->GETSPI_DONE
Parent:0,5,5,5
*Mar 11 15:57:05:204 2011 Sysname IKEV2/7/DEBUG:
Cookie:[00d96a52334f2295] [0000000000000000]
Local:111.0.0.1,Remote:111.0.0.2
[I], Seq:5
IDLING->INI_IKE_SA_INIT_SENT
*Mar 11 15:57:05:297 2011 Sysname IKEV2/7/DEBUG:
Cookie:[00d96a52334f2295] [d5be176a9e0e7527]
Local:111.0.0.1,Remote:111.0.0.2
182