HP Comware 5 Debug Manual Vol 2

Field
Description
Err/SubEr
Errdata:
Error code/sub-error code.
Error data.
Send UPDATE to x.x.x.x
BGP sent an update message to BGP neighbor
x.x.x.x.
Send UPDATE(Withdraw) to peer x.x.x.x
BGP sent an update withdraw message to BGP
neighbor x.x.x.x.
x.x.x.x/xx Destination IP address/mask.
INBOUND Inbound policy.
LocRemCross:Export Policy Check Failed
BGP exported policy check error when importing
routes to VRF routing table.
LocRemCross:Import Policy Check Error
BGP imported policy check error when importing
routes to VRF routing table.
in-label Incoming label.
out-label Outgoing label.
tnl id Tunnel id.
Create ILM Success BGP succeeded to create the ILM.
Delete ILM Success BGP succeeded to delete the ILM.
Create NHLFE success BGP succeeded to create the NHLFE.
Delete NHLFE success BGP succeeded to delete the NHLFE.
afi = 196(l2vpn) safi = 128(l2vpn)
The address family was 196, and the sub-address
family was 128(L2VPN).
Origin Origin of BGP.
AS Path AS Path of BGP.
Next Hop Next Hop of BGP.
Local Pref Local Preference of BGP.
MED MED attribute of BGP.
afi = 155(vpls) safi = 128(vpls)
The address family was 155, and the sub-address
family was 128(VPLS).
Create ILM6 Success BGP succeeded to create the ILM6.
Delete ILM6 Success BGP succeeded to delete the ILM6.
BGP Recv Label Route : Tunnel Waiting , BGP LSP isn't
created
BGP received a labeled route, but the tunnel was still
waiting, and the BGP LSP had not been established.
RouteDistinguisher:X:X RD value.
label offset:X Label offset.
label base:XXX Label start position.
Examples
# Enable BGP update debugging for IPv6-MBGP address family. When BGP receives an update, output
similar to the following example is generated:
198