HP Comware 5 Debug Manual Vol 2

Table 3 describes output fields and messages for the debugging mfib ipv6 no-cache command.
Table 130 Output from the debugging mfib ipv6 no-cache command
Field
Description
Receive no cache report
The IPv6 MFIB received an unknown IPv6 multicast
data packet.
No MFIB entry matches The IPv6 MFIB failed to find the matching entry.
(sadd, gadd) (S, G) entry.
Cache the packet The IPv6 MFIB cached IPv6 data packets.
Table 4 describes output fields and messages for the debugging mfib ipv6 packet command.
Table 131 Output from the debugging mfib ipv6 packet command
Field
Description
Receive/Drop packet
The IPv6 MFIB received or dropped IPv6 multicast
packets.
(sadd, gadd) (S, G) entry.
IIF Incoming interface.
OIF Outgoing interface.
The TTL TTL value of the IPv6 packet.
Forward multicast packet IPv6 multicast data packets were forwarded.
DP Data plane (supported by multi-core devices only).
Send packet to control plane
The data plane sent IPv6 multicast data packets to the
control plane (supported by multi-core devices only).
Drop packet because unknown packet to cpu function
is closed
The IPv6 MFIB dropped unknown IPv6 multicast data
packets because the function for sending unknown
IPv6 packets to CPU for process was disabled
(supported by multi-core devices only).
Table 5 describes output fields and messages for the debugging mfib ipv6 register command.
Table 132 Output from the debugging mfib ipv6 register command
Field
Description
Send register The IPv6 MFIB sent IPv6 register messages.
(sadd, gadd) (S, G) entry.
Dropping received register packet The IPv6 MFIB dropped error IPv6 register messages.
Table 6 describes output fields and messages for the debugging mfib ipv6 route command.
Table 133 Output from the debugging mfib ipv6 route command
Field
Description
add-entry message
The IPv6 MFIB received an add-entry message from
IPv6 multicast routing module (MRM).
202