HP Comware 5 Debug Manual Vol 2

Field
Description
del-entry message
The IPv6 MFIB received a del-entry message from IPv6
MRM.
set-IIF message
The IPv6 MFIB received a set-IIF message from IPv6
MRM.
del-OIF message
The IPv6 MFIB received a del-OIF message from IPv6
MRM.
add-OIF message
The IPv6 MFIB received an add-OIF message from
IPv6 MRM.
MRM IPv6 multicast routing module.
The Following OIFs are added The following outgoing interfaces were added.
(sadd, gadd) (S, G) entry.
Failed to change driver msg to mfib6 msg
The IPv6 MFIB failed to change the drive message to
the MFIB6 message (supported by multi-core devices
only).
Failed to change mfib6 entry
The IPv6 MFIB failed to change the MFIB6 table entry
(supported by multi-core devices only).
Failed to enable ipv6 unknown packet to cpu
The IPv6 MFIB failed to enable the function for sending
unknown IPv6 packets to CPU for process (supported
by multi-core devices only).
Table 7 describes output fields and messages for the debugging mfib ipv6 sync command.
Table 134 Output from the debugging mfib ipv6 sync command
Field
Description
added to updated list The IPv6 MFIB added an entry into the update list.
deleted from updated list The IPv6 MFIB deleted an entry from the updated list.
Encoded the ADD/DEL/MOD message
The IPv6 MFIB encapsulated the ADD/DEL/MOD
message.
(sadd, gadd) (S, G) entry.
Table 8 describes output fields and messages for the debugging mfib ipv6 upcall commands.
Table 135 Output from the debugging mfib ipv6 upcall command
Field
Description
Send No cache up call A report was sent to IPv6 MRM.
(sadd, gadd) (S, G) entry.
Table 9 describes output fields and messages for the debugging mfib ipv6 wrong-iif commands.
Table 136 Output from the debugging mfib ipv6 wrong-iif command
Field
Description
WRONG_IF packet
The IPv6 MFIB received an IPv6 multicast data packet
on an incorrect incoming interface.
203