HP Comware 5 Debug Manual Vol 2

IPv6 NetStream debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging ipv6 netstream event
Use debugging ipv6 netstream event to enable IPv6 NetStream event debugging.
Use undo debugging ipv6 netstream event to disable IPv6 NetStream event debugging.
Syntax
debugging ipv6 netstream event
undo debugging ipv6 netstream event
Default
IPv6 NetStream event debugging is disabled.
Views
User view
Default command level
1: Monitor level
Usage guidelines
Table 1 describes the output fields and messages for the debugging ipv6 netstream event command.
Table 140 Output from the debugging ipv6 netstream event command
Field
Description
IP Streamv6 Create cache IPv6 NetStream created IPv6 stream cache.
IP Streamv6 Destroy cache IPv6 NetStream cleared IPv6 stream cache.
IP Streamv6 Reset cache by force IPv6 NetStream reset IPv6 stream cache.
IP Streamv6 Malloc from system
IPv6 NetStream allocated memory for IPv6 stream
cache.
IP Streamv6 Add to active list
IPv6 NetStream added an IPv6 stream to the active
list.
IPv6 Stream Add to age list IPv6 NetStream added an IPv6 stream to the aged list.
IPv6 Stream Add a stream (Now 1 active streams)
IPv6 NetStream added an IPv6 stream entry (a total of
one active entry at present).
IPv6 Stream Update a stream IPv6 NetStream updated an IPv6 stream entry.
IPv6 Stream Age a stream (tcp fin or rst) An IPv6 stream entry (TCP FIN or RST) aged out.
IPv6 Stream Age a stream (active age or overflow)
An IPv6 stream entry aged out due to active flow
aging or entry overflow.
210