HP Comware 5 Debug Manual Vol 2

Field
Description
CPU 0 IPv6 Stream Add to active list:
Direct: O Stream Type: IPv6 IP version: 6
InIf: 0 OutIf: 51314696 InVrf: 0 OutVrf: 0
SrcIP: 1:2::3:4 DstIP: 1:2::3:5 Prot: 58
SrcPort: 0 DstPort: 32768 Tos: 0x0 FlowLabel: 0x0
TcpFlag: 0x0
SrcAS: 0 DstAS: 0 SrcMask: 0 DstMask: 0
Nexthop: 1:2::3:5 BGP Nexthop: ::
Lable 1:0-0-0 2:0-0-0 3:0-0-0
TopLabel Type: UNKNOWN IP: 0.0.0.0 Mask:
0.0.0.0
SrcMAC: 0000-0000-0000 DstMAC:
0000-0000-0000 SrcVlan: 0 DstVlan: 0
First: 0 Last: 0 Pkts: 0 0 Bytes: 0 104
Fields in an IPv6 stream entry:
• Direct—Direction.
• InIf—Inbound interface number.
• OutIf—Outbound interface number.
• InVrf—VPN to which inbound packets belong.
• OutVrf—VPN to which outbound packets belong.
• SrcIP—Source IP address.
• DstIP—Destination IP address.
• Prot—Protocol.
• SrcPort—Source port number.
• DstPort—Destination port number.
• FlowLabel—Stream label.
• TcpFlag—TCP flag.
• SrcAS—Source AS number.
• DstAS—Destination AS number.
• SrcMask—Source mask.
• DstMask—Destination mask.
• TopLabel Type—Type of the label at the top of the
label stack.
• SrcMAC—Source MAC address.
• DstMAC—Destination MAC address.
• SrcVlan—Source VLAN ID.
• DstVlan—Destination VLAN ID.
• First—First active time of a stream.
• Last—Last active time of a stream.
• Pkts—Number of packets in a stream.
• Bytes—Number of bytes of a stream.
CPU 0 as Aggre Add a stream (Now 1 active
streams):
InIf: 0 OutIf: 51314696 SrcAS: 0 DstAS: 0
Direct: O Aggre Type: as IP version : 6
First: 12381680 Last: 12381680 Streams: 1 Pkts: 0 1
Bytes: 0 104
Sample Mode: FULL Sample Interval: 0
Fields for AS aggregation:
• InIf—Inbound interface number.
• OutIf—Outbound interface number.
• SrcAS—Source AS number.
• DstAS—Destination AS number.
• Aggre Type—Aggregation type.
• First—First active time of a stream.
• Last—Last active time of a stream.
• Streams—Number of streams for aggregation
statistics.
• Pkts—Number of packets in a stream.
• Bytes—Number of bytes of a stream.
Examples
The output in the following example is generated under the following conditions:
•
IPv6 NetStream statistics are configured in the inbound direction of the interface Ethernet 1/0 on a
device.
•
A destination host is configured.
213