HP Comware 5 Debug Manual Vol 2

IPv6 PIM debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging pim ipv6
Use debugging pim ipv6 to enable IPv6 PIM debugging.
Use undo debugging pim ipv6 to disable IPv6 PIM debugging.
Syntax
debugging pim ipv6 { all | assert [ advanced-acl6-number ] [ receive | send ] | df | event
[ advanced-acl6-number ] | join-prune [ advanced-acl6-number ] [ receive | send ] | neighbor
[ basic-acl6-number ] [ receive | send ] | register [ advanced-acl6-number ] | routing-table
[ advanced-acl6-number ] | rp [ receive | send ] | state-refresh [ advanced-acl6-number ] [ receive |
send ] }
undo debugging pim ipv6 { all | assert [ receive | send ] | df | event | join-prune [ receive | send ] |
neighbor [ receive | send ] | register | routing-table | rp [ receive | send ] | state-refresh [ receive |
send ] }
Default
IPv6 PIM debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
all: Specifies all types of IPv6 PIM debugging.
assert: Specifies IPv6 PIM assert message debugging.
advanced-acl6-number: Specifies an advanced IPv6 ACL number in the range of 3000 to 3999. An IPv6
advanced ACL defines the range of IPv6 multicast groups that the advertised RP serves.
receive: Specifies inbound IPv6 PIM packet debugging.
send: Specifies outbound IPv6 PIM packet debugging.
df: Specifies IPv6 PIM DF information debugging.
event: Specifies IPv6 PIM event debugging.
join-prune: Specifies IPv6 PIM join/prune message debugging.
neighbor: Specifies IPv6 PIM neighbor debugging.
basic-acl6-number: Specifies a basic IPv6 ACL number in the range of 2000 to 2999.
register: Specifies IPv6 PIM register message debugging.
routing-table: Specifies debugging for the IPv6 PIM multicast routing table state.
218