HP Comware 5 Debug Manual Vol 2

rp: Specifies debugging for IPv6 PIM packets related to the BSR and the RP.
state-refresh: Specifies IPv6 PIM state refresh message debugging.
Usage guidelines
Table 1 describes output fields and messages for the debugging pim ipv6 assert command.
Table 142 Output from the debugging pim ipv6 assert command
Field
Description
pref Preference value.
metric Metric value.
rpt set/unset The RPT bit is 1/0.
reserved field non-zero The reserved field is non-zero.
unknown neighbor The neighbor is unknown.
truncated assert packet Invalid packet length.
bad group address/mask Incorrect IPv6 group address/mask.
unknown group family Incorrect group family.
group boundary Group boundary.
bad source address Incorrect IPv6 source address.
locally scoped Node-local or link-local scope.
Fsm:assert
Assert state machine.
current state
Current state of the assert state machine.
received event
Type of the event received by the assert state machine.
loser/winner/noinfo
The assert state machine was in loser, winner, or
no-information state.
state1->state2
The assert state machine was transferred from state1
to state2.
Table 2 describes output fields and messages for the debugging pim ipv6 df command.
Table 143 Output from the debugging pim ipv6 df command
Field
Description
DF election DF election started.
DFT DF election timer.
DFT expire time Expiration time of DF election timer.
MC Number of sent Offer or Winner packets.
Offer Initial state of DF election.
Lose DF election state: Lose.
Win DF election state: Win.
Backoff The winner DF received better Offer packets.
Table 3 describes output fields and messages for the debugging pim ipv6 event command.
219