HP Comware 5 Debug Manual Vol 2

Field
Description
Failed to pass MSF Failed to pass IPv6 multicast source filtering.
NotOriginator/Originator
The Originator state machine was in
not-originator/originator state.
SAT Expired The source-alive timer timed out.
Join suppressed
The device received a join message to the upstream
neighbor on the incoming interface and suppressed its
own join message.
Override it
The device received a prune message to the upstream
neighbor on the incoming interface and sent a join
message.
ET Expired
The IPv6 PIM-SM downstream interface timer timed
out.
register downstream Registering the outgoing interface.
Mcast-Boundary-Changed Multicast boundary change event.
flush timer
Timer used for periodically checking whether new RP
and DF information issued to the forwarding module
exist.
walk timer Timer used for periodically traversing RP table entries.
Table 4 describes output fields and messages for the debugging pim ipv6 join-prune command.
Table 145 Output from the debugging pim ipv6 join-prune command
Field
Description
JP Join/prune message.
GFT Graft message.
GAK Graft-ack message.
bad group/source address, mask or family Incorrect IPv6 group/source address, mask or family.
Upstream Upstream neighbor information in the message.
Groups Number of groups in the message.
Group: addr/mask --- m joins n prunes
Group information in the message:
• IPv6 group address/prefix length
• Number of times that the group was joined
• Number of times that the group was pruned
Join: addr/mask flag
Join: source address/prefix flag bit.
Message truncated. Ignoring message
The message was dropped due to invalid message
length.
Unable to decode address
Address decoding failed.
Upstream neighbor is not this router. Ignoring
The message was dropped because the upstream
neighbor is not this device.
221