HP Comware 5 Debug Manual Vol 2

Field
Description
group boundary detected for address1 on address2
Address 1 is within the multicast boundary range
configured on the interface corresponding to Address
2.
Group address1 ignored in message on address2
Address 1 is within the multicast boundary configured
on the interface corresponding to Address 2. This
group is ignored.
Message from unknown neighbor A message was received from an unknown neighbor.
Join/Prune received for non-local neighbor
A join/prune message for a non-local upstream
neighbor was received.
Override timer expires The prune override timer timed out.
Table 5 describes output fields and messages for the debugging pim ipv6 neighbor command.
Table 146 Output from the debugging pim ipv6 neighbor command
Field
Description
HEL
IPv6 PIM hello message.
hello packet
IPv6 PIM hello message.
Option: m, length: n
IPv6 PIM hello message option: option value
(specified by m) and option length: length value
(specified by n).
Holdtime:
Holdtime field of the IPv6 PIM hello message.
Tbit Tbit option.
Lan delay
LAN delay option.
Override interval
Override interval option.
DR priority
DR priority option.
Genid
Generation ID option.
Version Version field of the state refresh option.
Refresh interval State refresh interval field of the state refresh option.
Reserved Reserved field of the state refresh option.
Secondary address(es)
Address in the address list option.
unknown option value The option value is unknown.
without SR capability
The state refresh capability was disabled.
Elected as DR on interface interfacename
The device was elected as the DR in the network
attached to interfacename.
Unelected as DR on
interface interfacename
The device was no longer the DR for the network
attached to interfacename.
PIM Neighbor address on interface
interfacename timed out
Neighbor address on interfacename timed out.
222