HP Comware 5 Debug Manual Vol 2

Field
Description
Failed to create PIM neighbor address, PIM Hello
denied by neighbor policy on interfacename
A PIM neighbor relationship failed to be established
because the source address in the hello message
failed to pass the configured hello message filtering.
Table 6 describes output fields and messages for the debugging pim ipv6 register command.
Table 147 Output from the debugging pim ipv6 register command
Field
Description
REG
Register message.
RSP
Register-stop message.
Register Stop Register stopped.
Border bit
Boundary bit.
Null bit
Null bit.
src
Source address of the IPv6 packet.
dst
Destination address of the IPv6 packet.
Non-DR interface A non-DR interface.
probe
Probe message.
ignored
Message dropped.
Table 7 describes output fields and messages for the debugging pim ipv6 routing-table command.
Table 148 Output from the debugging pim ipv6 routing-table command
Field
Description
Creating/Deleting IPv6 PIM created or deleted entries.
mrt IPv6 multicast routing table.
Add/Del oil IPv6 PIM created or deleted outgoing interfaces.
Null iif Null incoming interface.
Adding/Deleting iif IPv6 PIM created or deleted incoming interfaces.
RP is not found IPv6 PIM failed to find the RP.
Table 8 describes output fields and messages for the debugging pim ipv6 rp command.
Table 149 Output from the debugging pim ipv6 rp command
Field
Description
receiving Message received.
sending Message sent.
auto-RP announce Auto-RP announce message.
auto-RP discovery Auto-RP discovery message.
C-RP/CRP Candidate RP.
223