HP Comware 5 Debug Manual Vol 2

IPv6 policy-based routing debugging
commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging ipv6 policy-based-route
Use debugging ipv6 policy-based-route to enable IPv6 policy-based routing (PBR) debugging.
Use undo debugging ipv6 policy-based-route to disable IPv6 PBR debugging.
Syntax
debugging ipv6 policy-based-route
undo debugging ipv6 policy-based-route
Default
IPv6 PBR debugging is disabled.
Views
User view
Default command level
1: Monitor level
Usage guidelines
Table 1 describes output fields and messages for the debugging ipv6 policy-based-route command.
Table 151 Output from the debugging ipv6 policy-based-route command
Field
Description
IPv6 Policy routing success IPv6 PBR succeeded in routing packets.
IPv6 Policy routing fail for interface index number
not exist
IPv6 PBR failed to send packets because the outgoing
interface with index number does not exist. (Support for
this output depends on the device model.)
IPv6 Policy routing fail for next-hop ipv6-address
error
IPv6 PBR failed due to a next-hop ipv6-address error.
No memory space while STRING
IPv6 PBR failed to allocate memory space while
performing STRING due to insufficient memory space.
Succeeded to modify policy policyname by adding
a node or modifying a node's attributes.
IPv6 PBR succeeded in adding a node or modifying
attributes of a node for policy policyname.
Failed to modify policy policyname by adding a
node or modifying a node's attributes
IPv6 PBR failed to add a node or modify attributes of a
node for policy policyname.
Succeeded to modify policy policyname by
deleting policy node by ID
IPv6 PBR succeeded in deleting a node with the specified
ID from policy policyname.
232