HP Comware 5 Debug Manual Vol 2

debugging ipx rip
Use debugging ipx rip to enable IPX RIP debugging.
Use undo debugging ipx rip to disable IPX RIP debugging.
Syntax
debugging ipx rip { event | packet [ verbose ] }
undo debugging ipx rip { event | packet [ verbose ] }
Default
IPX RIP debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
event: IPX RIP event debugging.
packet: IPX RIP packet debugging.
verbose: Displays detailed information about IPX RIP packet debugging.
Usage guidelines
Table 3 describes output fields and messages for the debugging ipx rip event command.
Table 154 Output from the debugging ipx rip event command
Field
Description
The number network equal route
nexthop: node
Number of equal cost routes.
The network network totally have
equal-route-number equal route
Number of equal cost routes to a destination network.
Deleting a RouteEntry for network
An IPX RIP route is deleted.
network—Destination IPX network number of an IPX RIP route.
interface-name Interface UP The RIP protocol is up on an IPX interface.
interface-name Interface DOWN The RIP protocol is down on an IPX interface.
No route valid in the route table for
network network
No valid route to the specified IPX network is found.
network—Destination IPX network number.
Redistribute static route :
network number network
IPX static route is imported into RIP.
Undo Redistribute static route :
network number network
IPX static route imported into RIP is removed.
Find the interface enable the split
horizon
Horizontal split is enabled on the IPX interface. When horizontal split
attributes are changed, update packets are sent.
Find the interface disable the split
horizon
Horizontal split is disabled on the IPX interface.
241