HP Comware 5 Debug Manual Vol 2

FC debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
FC interface debugging commands
The FC interface module name is identified as "FCLINK" in debugging messages.
debugging fc link
Use debugging fc link to enable FC link debugging.
Use undo debugging fc link to disable FC link debugging.
Syntax
debugging fc link { all | elp | error | esc | event | evfp | packet | timer } [ interface interface-type
interface-number ]
undo debugging fc link { all | elp | error | esc | event | evfp | packet | timer }
Default
FC link debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
all: All types of debugging.
elp: Exchange Link Parameters (ELP) debugging.
error: Error debugging.
esc: Exchange Switch Capabilities (ESC) debugging.
event: Event debugging.
evfp: Exchange Virtual Fabrics Parameters (EVFP) debugging.
packet: Packet debugging.
timer: Timer debugging.
interface interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
If you do not specify an interface, this command enables FC link debugging for all FC interfaces.
If you specify an interface, this command enables FC link debugging for the specified interface.
Table 1 describes the output fields and messages for the debugging fc link elp command.
20