HP Comware 5 Debug Manual Vol 2

Field
Description
Function type set is same with local configuration.
Type: type
The configured IRF bridge MAC persistence setting
was the same as the existing setting.
IRF bridge MAC persistence settings for the type field:
• 0—Bridge MAC address of the IRF fabric does not
change after the master leaves.
• 1—Bridge MAC address of the IRF fabric persists
for six minutes after the master leaves.
• 2—Bridge MAC address of the new master
replaces the original one as soon as the old master
leaves.
Receive reboot irf from driver
STM received a message from the driver about
rebooting the IRF fabric.
Table 6 describes output fields and messages for the debugging stm election packet command.
Table 166 Output from the debugging stm election packet command
Field
Description
Op: opration
Operation type:
• 18—Election acknowledgement packet.
• 19—Notification packet.
Num: num Number of member devices in the packet.
Ms: index Index of the current master in the topology database.
Len: len Total length of the packet.
Version: version System software image version of the system.
Content is: packet content Packet content in binary notation.
Table 7 describes output fields and messages for the debugging stm election state command.
Table 167 Output from the debugging stm election state command
Field
Description
State of STM Election module changes to rolestate
State of the master election state machine:
• 0—Initial. The state machine is initialized.
• 1—Electing. Master election is being performed.
• 2—SlaveWait. The MPU is joining the IRF fabric as
a standby for the global active MPU.
• 3—MasterWait. The MPU is joining the IRF fabric
as the global active MPU.
• 4—Slave. Standby MPU for the global active MPU.
• 5—Master. Global active MPU.
• 6—Loading. Standby MPU for the global active
MPU. This standby MPU is loading the system
software image.
• 7—Fail. Master election failed.
Table 8 describes output fields and messages for the debugging stm election timer command.
254