HP Comware 5 Debug Manual Vol 2

Table 168 Output from the debugging stm election timer command
Field
Description
Failed to create ELECT timer, error code errcode
STM failed to create a timer for sending election
packets.
Examples
# Enable master election debugging on the IRF fabric. The output in this example was created on a
daisy-chained two-member IRF fabric.
<Sysname> debugging stm election packet
*Nov 18 16:39:38:00 2008 Sysname STM/4/ROLE PACKET:Chassis=2-Slot=1;
Receieve election packet. Summary: Op:19 Num:3 Ms:0 Len:148 Port:2
Version: xxx
Content is:
000: 0a 0a 0a 0a 0a 0a 0a 0a 0a 0a 0a 0a 00 05 00 01 0b 0b 0b 0b 0b 0b 00 00
018: 00 00 00 00 00 04 00 02 0c 0c 0c 0c 0c 0c 00 00 00 00 00 00 00 04 00 03
030: 00 00 00 00 02 94 00 00 00 00 00 04 00 00 00 03 00 00 00 00 00 00 00 00
048: 00 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00
060: 00 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00
078: 00 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00
090: 00 00 00 00
// Card 1 on member device 2 received a master election packet.
debugging mad
Use debugging mad to enable MAD debugging.
Use undo debugging mad to disable MAD debugging.
Syntax
debugging mad { all | error | event } [ chassis chassis-number slot slot-number | slot slot-number | all ]
undo debugging mad { all | error | event } [ chassis chassis-number slot slot-number | slot slot-number
| all ]
Default
MAD debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
all: Specifies all types of MAD debugging.
error: Specifies MAD error debugging.
event: Specifies MAD event debugging.
255