HP Comware 5 Debug Manual Vol 2

Table 171 Output from the debugging ha message command
Field Description
Sending STM sent messages to the destination module.
Deliver up STM sent control messages to application modules.
From Module STM received messages from application modules.
Src MID Source module ID.
Src SID Source module sub-ID.
Dst MID Destination module ID.
Dst SID Destination module sub-ID.
Type
Message type. Table 3 describes values available for
this field.
Len Message length.
Table 172 Values for the type field of the debugging ha message command
Field Description
Type = 1 A subordinate device joined the IRF fabric.
Type = 2
A subordinate device requested for batch data
backup.
Type = 3
A subordinate device was removed from the IRF
fabric.
Type = 4 Master/subordinate switchover occurred.
Type = 5 IRF notified other modules to back up data in batch.
Type = 6
The master device notified the subordinate devices
that the batch backup operation finished on a specific
module.
Type = 7
The master device notified the subordinate devices
that the batch backup operation finished on all
modules.
Type = 8
IRF notified other modules to perform data smoothing
operation.
Type = 9 Data smoothing was completed on a specific module.
Type = a Data was backed up periodically.
Type = b
IRF notified other modules of backing up data
periodically.
Type = c Data was backed up in real time.
Type = d Data was backed up in batch.
Type = e
A subordinate device was removed from the IRF
fabric.
Type = f ACK message.
Type = 10 Data smoothing was completed on all modules.
258