HP Comware 5 Debug Manual Vol 2

Field
Description
Declaring as DIS,DIS Type type,on circuitName, Old
DIS (net1), New DIS net2
IS-IS is declaring the new DIS.
• type—L1 or L2.
• net1—Net entity title of the old DIS.
• net2—Net entity title of the new DIS.
Send Failure IS-IS failed to send a hello packet.
Update DIS Down Processing Failure IS-IS failed to process the DIS Down event.
Circuit State change reported for Unknown Circuit
Type
Interface type change error due to unknown interface
type.
Adjacency(s) Not deleted On circuit Down
Adjacency deletion failed after the interface was
down.
Rxed P2P IIH on circuitName.IIH Rejected Wrong Circ
Type(circuitType)
The received hello packet was rejected because the
interface type (point-to-point) is wrong.
• circuitName—Interface name.
• circuitType—Interface type, which can be L1, L2, or
L 12.
helloType IIH request reserved circuit type. Ignored
IS-IS received an IIH packet with interface type as
reserved and therefore ignored it.
helloType indicates the hello packet type: LAN L1,
LAN L2, or P2P.
Rxed helloType IIH with duplicate Local System ID. IIH
Discarded
The received hello packet was not processed due to a
duplicate system ID.
helloType indicates the hello packet type: LAN L1,
LAN L2, or P2P.
helloType IIH Authentication Failure. IIH Discarded
The received hello packet was discarded due to an
authentication failure.
helloType indicates the hello packet type: LAN L1,
LAN L2, or P2P.
Rxed helloType IIH has Invalid IP address.IIH Ignored
IP address is invalid and the received hello packet was
not processed.
helloType indicates the hello packet type: LAN L1,
LAN L2, or P2P.
Rxed helloType IIH contains No usable Ip Address. IIH
Discarded
The received hello packet was discarded because it
contains no usable IP address. helloType indicates the
hello packet type: LAN L1, LAN L2, or P2P.
Rxed helloType IIH on circuitName contains Duplicate
Ip Address. IIH Discarded
The received hello packet was discarded because it
contains a duplicate IP address.
• helloType—Hello packet type: LAN L1, LAN L2, or
P2 P.
• circuitName—Interface name.
Rxed helloType IIH on % circuitName contains
Duplicate Ipv6 Address. IIH Discarded
The received hello packet was discarded because it
contains a duplicate IPv6 address.
• helloType—PDU packet type: LAN L1, LAN L2, or
P2 P.
• circuitName—Interface name.
273