HP Comware 5 Debug Manual Vol 2

Field
Description
Rxed Serial IIH on circuitName, Protocol supported
mismatch. IIH Discarded
The received hello packet was discarded because of a
protocol mismatch.
circuitName indicates the interface name.
Rxed P2P IIH on % circuitName contains no Protocol
Support at all. IIH Ignored
The received hello packet was discarded because
there was no protocol support.
circuitName indicates the interface name.
Rxed Ethernet IIH on circuitName. Ignored
The received Ethernet IIH packet was discarded
because the interface type was not broadcast.
circuitName indicates the interface name.
helloType Level Mismatch.Local Level circuitLevel
Packet type mismatch.
• helloType—Hello packet type: LAN L1, LAN L2, or
P2 P.
• circuitLevelI—Current level of the link: L1, L2, or
L 12.
helloType, No common protocol supported
The received hello packet did not match a protocol.
helloType indicates the hello packet type: LAN L1,
LAN L2, or P2P.
Rxed LAN IIH from system : %systemId
IS-IS received an Ethernet IIH packet.
systemId indicates the system ID of the sending device.
Rxed P2P IIH from system : %systemId
IS-IS received a P2P IIH packet.
systemId indicates the system ID of the sending device.
Rxed ISH from system : %systemId
IS-IS received an ISH packet.
systemId indicates the system ID of the sending device.
Table 2 describes output fields and messages for the debugging isis authentication-error command.
Table 183 Output from the debugging isis authentication-error command
Field
Description
For all processes of the VPN instance
vpn-instance-name, Indication of authentication errors
debugging is on
The authentication error debugging is enabled for all
the IS-IS processes of the VPN instance.
For the process process-id, Indication of authentication
errors debugging is on
The authentication error debugging is enabled for the
IS-IS process.
Table 3 describes output fields and messages for the debugging isis checksum-error command.
Table 184 Output from the debugging isis checksum-error command
Field
Description
For all processes of the VPN instance
vpn-instance-name , IS-IS Checksum errors debugging
is on
The LSP checksum error debugging is enabled for all
the IS-IS processes of the VPN instance.
For the process process-id, IS-IS Checksum errors
debugging is on
The LSP checksum error debugging is enabled for the
IS-IS process.
274