HP Comware 5 Debug Manual Vol 2

Table 186 Output from the debugging isis datalink-receiving-packet command
Field
Description
Circuit NOT operationally ON Interface is not on for operation.
SYS not functional. Ignoring recvd packet
System is not functioning and it ignores the received
packets.
Rxed IS-IS PDU on Circuit circuitName, PDU's type is
packetType
IS-IS received a PDU on the interface.
• circuitName—Interface name.
• packetType—Interface type.
Table 6 describes output fields and messages for the debugging isis datalink-sending-packet command.
Table 187 Output from the debugging isis datalink-sending-packet command
Field
Description
Sending IS-IS PDU on Circuit circuitName
IS-IS is sending PDU through the interface.
circuitName indicates the interface name.
Socket Send PDU error An error occurred when the socket sent a PDU.
Socket Send PDU success Socket sent a PDU successfully.
Sending IS-IS PDU Failure Socket failed to send a PDU.
Table 7 describes output fields and messages for the debugging isis general-error command.
Table 188 Output from the debugging isis general-error command
Field
Description
UPDT: PDU length mismatch in SNP: RecLen = %d,
EncodeLen = %d.
SNP packet length mismatch.
RECV: PDU length mismatch in Hello PDU : RecLen
= %d, EncodeLen = %d
Hello packet length mismatch.
PROT-ERR: Wrong P2P IIH Hdr Length, %d. It should
be %d
Incorrect P2P Hello packet header length.
PROT-ERR: Wrong LAN IIH Hdr Length, %d. It should
be %d
Incorrect LAN Hello packet header length.
PROT-ERR: Wrong L1/2CSNP Hdr Length, %d. It
should be %d
Incorrect L1/2 CSNP packet header length.
PROT-ERR: Wrong L1/2 PSNP Hdr Length, %d. It
should be %d
Incorrect L1/2 PSNP packet header length.
PROT_ERR: Wrong L1/2 LSP Hdr Length, %d. It should
be %d
Incorrect L1/2 LSP packet header length.
Table 8 describes output fields and messages for the debugging isis graceful-restart command.
276