HP Comware 5 Debug Manual Vol 2

Table 189 Output from the debugging isis graceful-restart command
Field
Description
RST: levelType T1 Timer Started on circName,
Counter: count
GR timer started.
• levelType—System type: L1 or L2.
• count—Number of times GR timer has started.
• circName—Interface name.
RST: Notifying RM that the Process is Entering Restart.
IS-IS notifies RM that the process is entering the GR
state.
RST: Notifying RM that the Process is Leaving Restart
(Due to Rst Disable).
IS-IS notifies RM that the process is leaving the GR
state because GR is disabled.
RST: levelType T1 Timer Expired on circName,
Counter: count
GR timer expired.
• levelType—System type: L1 or L2.
• count—Number of times GR timer has started.
• circName—Interface name.
RST: Restart COMPLETE in millisecond ms
GR is complete.
millisecond indicates the length of GR duration in
milliseconds.
Table 9 describes output fields and messages for the debugging isis ha-events command.
Table 190 Output from the debugging isis ha-events command
Field
Description
HSB-SMOOTH: Circuit circuitName is on wrong state
while enabling
An error occurred while the interface was being
enabled during the smoothing.
HSB-SMOOTH: Processing the circuit join multicast
group error
An error occurred while the interface was joining the
multicast group during the smoothing.
HSB-SMOOTH: Circuit circuitName not Consistent
with RM/RM6
The current interface is inconsistent with RM/RM6
during the smoothing.
HSB-SMOOTH: Update module processing the circuit
down error
The update module failed to process the interface
Down event during the smoothing.
HSB-SMOOTH: Update module processing the circuit
up error
The update module failed to process the interface Up
event during the smoothing.
HSB-SMOOTH: Failed to start Max LspGen timer
IS-IS failed to start the maximum LSP generation
interval timer during the smoothing.
HSB-SMOOTH: LSP Expired. Purging LSP
LSP expired during the smoothing and the LSP was
deleted.
HSB-SMOOTH: While LSDB Smoothing, Failed to
Start Lsp age timer
IS-IS failed to starting LSP age timer in LSDB
smoothing.
HSB-SMOOTH: Batch Backup was Not Complete :
Resetting ISIS
Batch backup was not complete during the smoothing
and IS-IS was being reset.
Length : length Real-time backup message length.
Table 10 describes output fields and messages for the debugging isis interface-information command.
277