HP Comware 5 Debug Manual Vol 2

Field
Description
ISIS-procId-NSR_EVE: End to smooth enable
levelType adjacency.
NSR completes recovering adjacency information.
levelType indicates the neighbor level, Level-1 and
Level-2.
NSR_EVE: Begin to flush routes. NSR starts aging routes.
NSR_EVE: End to flush routes. NSR completes aging routes.
NSR_EVE: Begin to purge local LevelType LSP.
NSR starts purging local backup LSPs.
levelType indicates the LSP level, Level-1 and Level-2.
NSR_EVE: End to purge local LevelType LSP.
NSR completes purging local backup LSPs.
levelType indicates the LSP level, Level-1 and Level-2.
Tab l e 12 describes output fields and messages for the debugging isis receiving-packet-content
command.
Table 193 Output from the debugging isis receiving-packet-content command
Field
Description
Rxed pduLevel CSNP From sourceId (circuitName)
IS-IS received a CSNP packet.
• pduLevel—L1 or L2.
• sourceId—Source NSAP address of the CSNP
packet.
• circuitName—Name of the interface through
which the CSNP packet was received.
** ** ** ** ** ** ** ** ** ** ** ** ** ** ** **
** ** **
Contents in the CSNP packet, including the header,
LSP entries, and Authentication Information field.
Rxed pduLevel PSNP From sourceId (circuitName)
IS-IS received a PSNP packet.
• pduLevel—L1 or L2.
• sourceId—Source NSAP address of the PSNP
packet.
• circuitName—Name of the interface through
which the PSNP packet was received.
** ** ** ** ** ** ** ** ** ** ** ** ** ** ** **
** ** **
Contents in the corresponding PSNP packet, including
the header, LSP entries, and Authentication
Information field.
Tab l e 13 describes output fields and messages for the debugging isis self-originate-update command.
Table 194 Output from the debugging isis self-originate-update command
Field
Description
UPDT: RESET REQUIRED The IS-IS process needs to be reset.
UPDT: Circuit IPv4/IPv6 Up circName
Local interface is up (IPv4/IPv6).
circName indicates the interface name.
UPDT: Circuit IPv4/IPv6 Down circName
Local interface is down (IPv4/IPv6).
circName indicates the interface name.
UPDT: Circuit Cost change process failed IS-IS failed to change the local interface cost.
279