HP Comware 5 Debug Manual Vol 2

Field
Description
UPDT: Circuit Ipv4/v6 Addr add ipAddress
The IPv4/IPv6 address was added to the interface.
ipAddress indicates the interface IP address.
UPDT: Circuit Ipv4/v6 Addr Del ipAddress
The IPv4/IPv6 address was deleted from the interface.
ipAddress indicates the interface IP address.
UPDT: Rxed levelType Default cost Change
The default cost of the local interface changed.
levelType indicates the interface level type: L1 or L2.
INTELLITMR: Starting a lspLevel LSP Timer for LSP
Generation
IS-IS started the LSP generation timer.
lspLevel: LSP type: L1 or L2.
UPDT: Filling of Auth data in Lsp failed
IS-IS failed to fill authentication information in the
locally originated LSP.
UPDT: Creation of Zero lsp Desc failed IS-IS failed to create local zero LSP fragment.
UPDT: Adding Ipv4/v6 Address ipAddress into
pduLevel LSPs
IS-IS is to add the IP address to the local LSPs.
UPDT: Adding in the LSP Neighbour option, TLV 22 IS-IS added the neighbor TLV to the local LSP.
UPDT: Adding Redist Address ipAddress into
pduLevel LSPs,
IS-IS is adding the redistributed route to the local LSPs.
UPDT: Updating LSP Option Success IS-IS updated the LSP TLV successfully.
UPDT: Error Adding Summary Reachability in
pduLevel LSPs
IS-IS failed to add a summary address to the local
LSPs.
Tab l e 14 describes output fields and messages for the debugging isis sending-packet-content command.
Table 195 Output from the debugging isis sending-packet-content command
Field
Description
Sending pduLevel pduType on circuitName
IS-IS is sending a PDU.
• pduLevel—L1 or L2.
• pduTyp—PDU type: PSNP or CSNP.
• circuitName—Name of the sending interface.
** ** ** ** ** ** ** ** ** ** ** ** ** ** ** **
** ** **** ** ** ** ** **
Contents in the corresponding CSNP/PSNP packet,
including the header, LSP entries, and Authentication
Information field.
Ta b l e 15 describes output fields and messages for the debugging isis snp-packet command.
Table 196 Output from the debugging isis snp-packet command
Field
Description
CSNP Range from startLspId to endLspId
Range of received CSNP packets.
• startLspId—Start LSP ID.
• endLspId—End LSP ID.
280