Manualshelf

HP Comware 5 Debug Manual Vol 2

ManualsBrandsHP ManualsNetwork HardwareHP HSR6804 Router Chassis
21222324252627282930
*Sep 25 10:10:35:328 2009 Sysname FCLINK/7/ELP: Select parameters result: Negotiatio
n succeeded, interface Fc0/3/0, VSAN 1.
// ELP successfully negotiated parameters.
*Sep 25 10:10:35:328 2009 Sysname FCLINK/7/ELP: Send ACC frame, interface Fc0/3/0, V
SAN 1.
// ELP sent ACC frames out interface FC 0/3/0 and VSAN 1 to which the interface belongs.
%Sep 25 10:10:35:343 2009 Sysname IFNET/4/UPDOWN:
Line protocol on the interface Fc0/3/0 is UP
// The link layer state of interface FC 0/3/0 is UP.
*Sep 25 10:10:35:343 2009 Sysname FCLINK/7/ELP: Received ACK event, interface Fc0/3/
0, VSAN 1.
// FCLINK received ACK events on interface FC 0/3/0 and VSAN 1 to which the interface belongs.
*Sep 25 10:10:35:343 2009 Sysname FCLINK/7/ELP: ELP negotiation succeeded, interface
Fc0/3/0, VSAN 1.
// ELP negotiation succeeded on interface FC 0/3/0 and VSAN 1 to which the interface belongs.
# Enable FC link error debugging. Output similar to the following example is generated when the
following conditions exist:
•
The FC device is started.
•
One end of a link is a link bundle member and the other end is not.
<Sysname> debugging fc link error
*Nov 12 10:11:47:422 2009 Sysname FCLINK/7/ERROR: Interface Fc0/3/0 is a bundle member
but the peer end is not, VSAN 1.
# Interface FC 0/3/0 (belonging to VSAN 1) is a link bundle member, and the peer end is not.
# Enable ESC debugging. Output similar to the following example is generated when the device is
started.
<Sysname> debugging fc link esc
*Nov 25 10:50:15:562 2009 Sysname FCLINK/7/ESC: Received request frames from the interface
Fc0/3/0.
// FCLINK received request frames on interface FC 0/3/0.
*Nov 25 10:50:15:562 2009 Sysname FCLINK/7/ESC: Encapsulate ACC frame on interface Fc0/3/0.
// FCLINK encapsulated ACC frames on interface FC 0/3/0.
*Nov 25 10:50:15:562 2009 Sysname FCLINK/7/ESC: Received ACK event on interface Fc0/3/0.
// FCLINK received ACK events on interface FC 0/3/0.
# Enable the event debugging. Output similar to the following example is generated when the following
conditions exist:
•
The FC device is enabled.
•
Both ends of a link go up physically.
<Sysname> debugging fc link event
%Nov 12 10:19:41:860 2009 Sysname IFNET/4/LINK UPDOWN:
Fc0/3/0: link status is UP
// Interface FC 0/3/0 went UP physically.
*Nov 12 10:19:41:860 2009 Sysname FCLINK/7/EVENT:Received upstream interface event, in
terface Fc0/3/0, command 0.
23