HP Comware 5 Debug Manual Vol 2

Field
Description
ISPF-EVE:Changed Link... sourceId --> destId OldCost:
oldCost NewCost: newCost [AttAdjs: attAdjNum]
[Ingore2way] [Tree] [Back] [Incr] [Decr] [Del] [Usage]
[Nhop] [Involved] [NewPath]
Links changed.
• sourceId—Source system ID.
• destId—Destination system ID.
• oldCost—Old path cost value.
• newCost—New path cost value.
• attAdjNum—Number of ATT neighbors.
CHG: Node's usage/nexthop will be changed.Dist:
distanceValue Nexthops: nexthopNum Nbrs:
nbrNum Parents: parentNum [RmtNbr] [Tree] [Tent]
[Direct ] [Overload] [Del] [Isolated]
The adjacency protocol type or next hop of the local
node has changed.
• distanceValue—Cost of the path to the root node.
• nexthopNum—Number of next hops of the node.
• nbrNum—Number of neighbors of the node.
• parentNum—Number of parent nodes.
CHG: Ignore2way Link of the ROOT node is
considered. Dist: distanceValue Nexthops:
nexthopNum Nbrs: nbrNum Parents: parentNum
[RmtNbr] [Tree] [Tent] [Direct ] [Overload] [Del]
[Isolated]
For the link of the local node, the two-way check was
ignored.
• distanceValue—Cost of the path to the root node.
• nexthopNum—Number of next hops of the node.
• nbrNum—Number of neighbors of the node.
• parentNum—Number of parent nodes.
ISIS-procId-AREA
Area address-related information.
procId indicates the IS-IS process ID.
AREA:Install one Area [newareaAddress] for (L
sysLevel)( MT topoId) l1referCount / l2referCount
[ADV]
A new area address is added.
• newareaAddress—New area address.
• sysLevel—System level.
• topoId—Topology name.
• l1referCount—Level 1 reference count of the area
address.
• l2referCount—Level 2 reference count of the area
address.
AREA:Remove one Area [oldareaAddress] for L
sysLevel MT topoId l1referCount / l2referCount [ADV]
Remove an area address.
• oldareaAddress—Old area address.
• topoId—Topology number.
• l1referCount—Level 1 reference count of the area
address.
• l2referCount—Level 2 reference count of the area
address.
LFA-PRCS: Selecting backup nexthop backNexthop
with flag attr for primary nexthop priNexthop
Select a backup next hop. Both the primary and
backup next hops are displayed.
• backNexthop—Backup next hop.
• attr—Attribute of the backup next hop.
• priNexthop—Primary next hop.
ISIS-procId-SPF-PRC
Information about PRC route updates.
procId indicates the IS-IS process ID.
294