HP Comware 5 Debug Manual Vol 2

L2TP debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging l2tp
Use debugging l2tp to enable debugging for L2TP.
Use undo debugging l2tp to disable debugging for L2TP.
Syntax
debugging l2tp { all | control | dump | error | event | hidden | payload | time-stamp }
undo debugging l2tp { all | control | dump | error | event | hidden | payload | time-stamp }
Default
Debugging for L2TP is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
all: Specifies all types of debugging for L2TP.
control: Specifies debugging for control packets.
dump: Specifies debugging for PPP packets.
error: Specifies debugging for L2TP errors.
event: Specifies debugging for L2TP events.
hidden: Specifies debugging for hidden AVP.
payload: Specifies debugging for L2TP data packets.
time-stamp: Specifies debugging for timestamp.
Usage guidelines
Table 1 describes the output fields and messages for the debugging l2tp control command.
Table 205 Output from the debugging l2tp control command
Field
Description
AVP Message Type AVP that indicates the message type.
AVP Protocol version AVP that indicates the protocol version.
AVP Host name
AVP that indicates the host name of the sending
device.
297