HP Comware 5 Debug Manual Vol 2

*0.1798829 lac L2TP/7/L2TDBG: L2TP::Parse AVP Challenge response: 9A D4 4B 91 6B 99 B9
A6 5A 2E 4A 4B 87 20 50 C8
// L2TP parsed the CHAP authentication challenge code as 9A D4 4B 91 6B 99 B9 A6 5A 2E 4A 4B
87 20 50 C8.
*0.1798829 lac L2TP/7/L2TDBG: L2TP::Put AVP Message Type:
START_CONTROL_CONNECTION_CONNECTED
// The connection response type of the control packet is START_CONTROL_CONNECTION_
CONNECTED.
*0.1798829 lac L2TP/7/L2TDBG: L2TP::Put AVP Challenge response:B0 59 29 D9 32 2F A0 D4
29 63 2F 9D 84 DF 54 D2
// L2TP set the CHAP authentication response code to B0 59 29 D9 32 2F A0 D4 29 63 2F 9D 84 DF
54 D2.
*0.1798829 lac L2TP/7/L2TDBG: L2TP:: O Tunnel 1 send SCCCN to tunnel 1
*0.1798829 lac L2TP/7/L2TDBG: L2TP::Tunnel 1 Create Hello timer
*0.1798829 lac L2TP/7/L2TDBG: L2TP::Tunnel 1 Start Waiting Calls
*0.1798829 lac L2TP/7/L2TDBG: L2TP::Put AVP Message Type: INCOMING_CALL_REQUEST
// The message type of the incoming call request is INCOMING_CALL_REQUEST.
*0.1798829 lac L2TP/7/L2TDBG: L2TP::Put AVP Assigned call ID: 8680
*0.1798829 lac L2TP/7/L2TDBG: L2TP::Put AVP Call serial number: 8680
*0.1798844 lac L2TP/7/L2TDBG: L2TP::Put AVP Bearer type : 3
*0.1798844 lac L2TP/7/L2TDBG: L2TP::Put AVP Physical channel number: 0
*0.1798844 lac L2TP/7/L2TDBG: L2TP::Put AVP Dialed number: 8888
// L2TP configured the AVP indications.
*0.1798844 lac L2TP/7/L2TDBG: L2TP:: O Call 8680 send INCOMING_CALL_REQUEST.
*0.1798844 lac L2TP/7/L2TDBG: L2TP::Tunnel 1 recv ctrl message Resume Hello timer
*0.1798844 lac L2TP/7/L2TDBG: L2TP::Proc Peer control type=11, len = 36
*0.1798844 lac L2TP/7/L2TDBG: L2TP:: I Call 8680 Recv ICRP in state 4 from Call
0
*0.1798844 lac L2TP/7/L2TDBG: L2TP::Tunnel 1 Resume 60 second Hello timer
*0.1798844 lac L2TP/7/L2TDBG: L2TP::Check ICRP MSG TYPE = 11
*0.1798844 lac L2TP/7/L2TDBG: L2TP::Parse AVP remote call ID: 27710
*0.1798860 lac L2TP/7/L2TDBG: L2TP::Parse AVP remote receive window size: 4
// L2TP parsed the AVP attributes.
*0.1798860 lac L2TP/7/L2TDBG: L2TP::Put AVP Message Type: INCOMING_CALL_CONNECTED
// The message type of incoming call connection response is INCOMING_CALL_CONNECTED.
*0.1798860 lac L2TP/7/L2TDBG: L2TP::Put AVP Tx connect speed: 0
*0.1798860 lac L2TP/7/L2TDBG: L2TP::Put AVP Framing type : 3
*0.1798860 lac L2TP/7/L2TDBG: L2TP::Put AVP Receive window size: 4
*0.1798860 lac L2TP/7/L2TDBG: L2TP::Put AVP Sequence number required.
*0.1798860 lac L2TP/7/L2TDBG: L2TP::Put AVP Initial received LCP options.
*0.1798860 lac L2TP/7/L2TDBG: L2TP::Put AVP Last sent LCP options.
*0.1798860 lac L2TP/7/L2TDBG: L2TP::Put AVP Last received LCP options.
*0.1798860 lac L2TP/7/L2TDBG: L2TP::Put AVP Proxy authentication type : 3
*0.1798875 lac L2TP/7/L2TDBG: L2TP::Put AVP Proxy authentication Name : [e-mail]
*0.1798875 lac L2TP/7/L2TDBG: L2TP::Put AVP Proxy authentication ID : 256
*0.1798875 lac L2TP/7/L2TDBG: L2TP::Parse AVP Proxy authenticate response:75 73 65 72 68
75 61 77 65 69
301