HP Comware 5 Debug Manual Vol 2

c0/3/0 join queue successfully.
// Packets received on interface FC 0/3/0 were successfully assigned to the input packet queue.
# Enable timer debugging. Output similar to the following example is generated when the following
conditions exist:
•
The FC device is started.
•
Both ends of a link go up physically.
<Sysname> debugging fc link timer
%Nov 12 10:57:37:360 2009 Sysname IFNET/4/LINK UPDOWN:
Fc0/3/0: link status is UP
// Interface FC 0/3/0 went UP physically.
*Nov 12 10:57:37:360 2009 Sysname FCLINK/7/TIMER: ELP create timeout timer, interfac
e Fc0/3/0, VSAN 1.
// On interface FC 0/3/0 in VSAN 1, ELP successfully created a timeout timer.
*Nov 12 10:57:37:391 2009 Sysname FCLINK/7/TIMER: ESC succeeded in creating timer on the
interface Fc0/3/0, VSAN 1.
// On interface FC 0/3/0 in VSAN 1, ESC successfully created a timer.
%Nov 12 10:57:37:406 2009 Sysname IFNET/4/UPDOWN:
Line protocol on the interface Fc0/3/0 is UP
// The link layer state of interface FC 0/3/0 is UP.
debugging fc link login-out
Use debugging fc link login-out to enable FC login and logout debugging.
Use undo debugging fc link login-out to disable FC login and logout debugging.
Syntax
debugging fc link login-out
undo debugging fc link login-out
Default
Debugging is disabled for FC login and logout.
Views
User view
Default command level
1: M o n i t or level
Usage guidelines
Table 7 describes the output fields and messages for the debugging fc link login-out command.
Table 21 Output from the debugging fc link login-out command
Field
Description
FC_ID FC_ID that a port applied for during registration.
26