HP Comware 5 Debug Manual Vol 2

// Router B tried to establish a socket connection to PC 2 to forward the packet to PC 2.
debugging x25 xot
Use debugging x25 xot to enable XOT debugging.
Use undo debugging x25 xot to disable XOT debugging.
Syntax
debugging x25 xot { all | event | packet }
undo debugging x25 xot { all | event | packet }
Default
All types of XOT debugging are disabled.
Views
User view
Default command level
1: Monitor level
Parameters
all: All types of XOT (X.25 over TCP) debugging.
event: Debugging for XOT events.
packet: Debugging for XOT packets.
Usage guidelines
Tab l e 13 describes the output fields and messages for the debugging x25 xot event command.
Table 220 Output from the debugging x25 xot event command
Field
Description
from local : ip-address : port-num connect to :
ip-address : port-num
A connection was established from an interface of the
local device to another device.
PVC Setup from : ip-address : port-num process
process-result
Processing the PVC XOT connection initiated from an
IP address failed or succeeded.
Call in from : ip-address : port-num process
process-result
Processing the PVC XOT connection received from an
interface failed or succeeded.
XOT: Fail to create x25cb X25 failed to create the XOT control block.
XOT: delete xot x25cb X25 removed the XOT control block.
XOT: socket can't match
X25 failed to locate the XOT control block of a socket
ID.
XOT: can't find XOT LCD
The VC number obtained from the XOT control block is
null.
XOT Task: Get a error message The XOT task received an error message.
XOT: make pvc setup packet failed X25 failed to build a PVC SETUP packet.
XOT: pvc setup packet send error X25 failed to send a PVC SETUP packet.
XOT: pvc setup packet send out A SETUP packet was sent successfully.
320