HP Comware 5 Debug Manual Vol 2

LLDP debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging dcbx
Use debugging dcbx to enable DCBX debugging.
Use undo debugging dcbx to disable DCBX debugging.
Syntax
debugging dcbx { all | error | event } [ interface interface-type interface-number ]
undo debugging dcbx { all | error | event } [ interface interface-type interface-number ]
Default
DCBX debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
all: All types of debugging for DCBX.
error: DCBX error debugging.
event: DCBX event debugging.
interface interface-type interface-number: Specifies a port by its interface type and interface number.
Usage guidelines
Table 1 describes the output fields and messages for the debugging dcbx error command.
Table 222 Output from the debugging dcbx error command
• Field
• Description
•
Failed to malloc for RPC in setting
debug state
•
LLDP failed to allocate memory for
RPC when setting the debugging
state.
•
The TLV will be discarded for the
neighbor number not 1
•
The TLV was dropped because the
number of neighbors was not 1.
•
Failed to update remote peer by
remote TLV(sym)
•
LLDP failed to update the peer end by
remote TLV (symmetrical state
machine).
324