HP Comware 5 Debug Manual Vol 2

*Mar 23 14:38:34:282 2010 DeviceA DCBX/7/EVENT: -Slot=1; DCBX Adapter PFCADP Interface
Ethernet1/1(If-Index 9437192):Received the interface deleting event.
*Mar 23 14:38:34:282 2010 DeviceA DCBX/7/EVENT: -Slot=1; DCBX Adapter PFCADP Interface
Ethernet1/1(If-Index 9437192):The DCBX entity has been deleted.
// The PFC module received an interface delete event, and it deleted the DCBX entity.
debugging lldp
Use debugging lldp to enable a type of LLDP debugging.
Use undo debugging lldp to disable a type of LLDP debugging.
Syntax
debugging lldp { all | error | event | fsm [ interface interface-type interface-number ] | packet [ receive
| transmit ] [ interface interface-type interface-number ] [ brief ] }
undo debugging lldp { all | error | event | fsm [ interface interface-type interface-number ] | packet
[ receive | transmit ] [ interface interface-type interface-number ] }
Default
LLDP debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
all: All types of debugging for LLDP.
error: Debugging for LLDP errors.
event: Debugging for LLDP events.
fsm: Debugging for LLDP state machines.
packets: Debugging for LLDP packets.
receive: Debugging for LLDP packet receiving.
transmit: Debugging for LLDP packet transmitting.
interface interface-type interface-number: Specifies a port by its type and number.
brief: Displays LLDP packet debugging information in brief.
Usage guidelines
If you do not specify a port, LLDP debugging is enabled on all interfaces.
Table 3 describes the output fields and messages for the debugging lldp error command.
Table 224 Output from the debugging lldp error command
• Field
• Description
•
Memory malloc error
•
LLDP failed to allocate memory.
•
Port portNum (IfIndex Ifindex)
•
Port number and port index.
327