HP Comware 5 Debug Manual Vol 2

• Field
• Description
•
Get port information error
•
LLDP failed to get port information.
•
Port LLDP is disabled
•
LLDP is disabled on the port.
•
Port admin status do not support to
receive message
•
The port is administratively disabled
to receive packets.
•
The message length is error
•
The message length was invalid.
•
No end TLV
•
There was no End of LLDPDU TLV.
•
End TLV length error
•
The length of the End of LLDPDU TLV
was invalid.
•
Receive the chassis ID TLV already
•
A packet carrying the chassis ID TLV
had been received.
•
Receive the port ID TLV already
•
Port ID TLV was received.
•
Receive the TTL TLV already
•
Time to Live TLV was received.
•
Receive the port description TLV
already
•
Port Description TLV was received.
•
Receive the system name TLV
already
•
System Name TLV was received.
•
Receive the system description TLV
already
•
System Description TLV was
received.
•
Receive the system capabilities TLV
already
•
System Capabilities TLV was
received.
•
Receive the same management
address TLV already
•
A packet carrying the same
Management Address TLV was
received.
•
Receive the same unknown TLV
already
•
The unknown TLV was received
once.
•
Receive the port VLAN ID TLV
already
•
Port VLAN ID TLV was received.
•
Receive the same port and protocol
ID TLV already
•
A packet carrying the same Port and
protocol VLAN ID TLV was received.
•
Receive the same VLAN name TLV
already
•
A packet carrying the same VLAN
Name TLV was received.
•
Receive the mac/physic
configuration/status TLV already
•
A packet carrying the MAC/PHY
Configuration/Status TLV was
received.
•
Receive the power via MDI TLV
already
•
A packet carrying the Power Via
MDI TLV was received.
•
Receive the link aggregation TLV
already
•
A packet carrying the link
aggregation TLV was received.
•
Receive the max frame size TLV
already
•
A packet carrying the Max Frame
Size TLV was received.
•
Receive
the power stateful control
TLV already
•
A packet carrying the Power Stateful
Control TLV was received.
328