HP Comware 5 Debug Manual Vol 2

• Field
• Description
•
Failure to set the global variable
trap_interval
•
LLDP failed to set the trap message
transmission interval.
•
Failure to write the packet receive
event
•
LLDP failed to write the packet
receive event.
•
Failu
re to synchronize the global
config
•
LLDP failed to synchronize the global
configuration.
•
Failure to malloc the port portNum
(IfIndex IfIndex) 's memory
•
LLDP failed to allocate memory for
port information.
• portNum—Port number.
• Ifindex—Port index.
•
Master board fail to send system
information to interface board
•
The master board failed to send the
latest system information to the
interface board.
•
Master board fail to send IPC
message
•
The master board failed to send an
IPC message.
•
Local board fail to get
local port
information
•
The local board failed to get local
port information.
•
Fail to compare port information
•
LLDP failed to compare port
information.
•
Location TLV is disabled to be sent
•
Location Identification TLV sending is
not supported.
•
MED MDI TLV is disabled to be sent
•
MED MDI TLV sending is not
supported.
•
Network policy TLV is disabled to be
sent
•
Network Policy TLV sending is not
supported.
•
MED capabilities TLV is disabled to
be sent
•
LLDP-MED Capabilities TLV sending
is not supported.
•
Receive the same protocol ID TLV
already
•
A packet carrying the same protocol
ID TLV was received.
•
Port desc TLV length error
•
Port Description TLV length error.
•
System desc TLV length error
•
System Description TLV length error.
•
Proc error
•
Processing error.
•
Create TPI node failed
•
LLDP failed to create a TPI node.
•
Delete TPI node failed
•
LLDP failed to delete a TPI node.
Table 4 describes the output fields and messages for the debugging lldp fsm command.
330