HP Comware 5 Debug Manual Vol 2

Default
The debugging for the fabric configuration module is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
all: All types of debugging.
error: Error debugging.
event: Event debugging.
packet: Packet debugging.
timer: Timer debugging.
vsan vsan-id: Enables debugging for the specified VSAN. The vsan-id argument ranges from 1 to 3839.
If you do not specify a VSAN, this command enables debugging for all VSANs.
Usage guidelines
Table 8 describes the output fields and messages for the debugging fc configuration event command.
Table 22 Output from the debugging fc configuration event command
Field
Description
Received event event-id on interface interface-name
from ifnet.
Interface interface-name received event event-id.
Value 2 of event-id indicates deleting an interface,
and value 8 indicates unplugging an interface.
Entered state state. Fabric entered the state state. state can be Init, BF,
RCF, EFP, Principal, Request, Subordinate, or Static.
Failed to allocate the domain ID, errcode: errcode.
Fabric failed to allocate the domain ID. The error code
is errcode. Value 1 of errcode indicates that some of
the requested Domain_IDs have been allocated. Value
2 indicates that all Domain_IDs have been allocated.
28