HP Comware 5 Debug Manual Vol 2

Table 227 Output from the debugging loopback-detection abnormal command
Field
Description
Failed to set interface handle ( ulRet: 0x2 ) LPDT failed to set interface handle (error code: 0x2).
Failed to get interface handle ( ulRet :0x3 )
LPDT failed to obtain interface handle (error code:
0x3).
Received MBuf is null LPDT received a packet without data.
Failed to get slot of interface LPDT failed to obtain the slot ID of the interface.
RPC message received in RPC Callback is null
The remote procedure call (RPC) message received in
RPC callback is null.
Table 228 Output from the debugging loopback-detection event command
Field
Description
Loopback detection interval changes from 30 to 10
Loopback detection interval changed from 30
seconds to 10 seconds.
Received slot insert message [Slot ID:1]
LPDT received a slot insertion event message (slot 1
was inserted.
Received interface create event
[Bridge-Aggregation1]
LPDT received an interface creation event message
(aggregate interface 1 was created).
Received interface delete event
[Bridge-Aggregation1]
LPDT received an interface deletion event message
(aggregate interface 1 was deleted).
Received link-down event [Ethernet1/3]
LPDT received a link-down event message (Ethernet
1/3 got down).
Received VLAN delete event [start Vlan ID:2, end Vlan
ID:2]
LPDT received a VLAN deletion event message (the
start VLAN ID is 2 and the end VLAN ID is 2).
Received batch backup event [Destination Slot:128]
LPDT received a batch backup event message (the
destination slot is 128).
Received batch data backup event LPDT received a data batch backup event message.
Received realtime data backup event
LPDT received a real-time data backup event
message.
Received smooth event LPDT received a smooth event message.
Received smooth over event
LPDT received a message for notifying the completion
of a smooth event.
Failed to send IPC message, drop the message
[type:5, destination node:1]
LPDT failed to send an interprocess communications
(IPC) message, and the message was dropped. The
message type is 5, and the destination node is 1.
Failed to send IPC message, try to retransmit [type:5,
destination node:1]
LPDT failed to send an interprocess communications
message and tried to retransmit the message. The
message type is 5, and the destination node is 1.
Received IPC ack "fail", destination node[1] was up
and retransmitted the message[type:5]
LPDT failed to receive an IPC ACK message. The
destination node 1 was up and the message was
retransmitted. The message type is 5.
340