HP Comware 5 Debug Manual Vol 2

Field
Description
Notified fabric event event-id. Fabric notified event event-id of the fabric module. The
values of event-id include:
• 0x01—WWN change event.
• 0x02—Domain ID change event.
• 0x04—F_S_TOV change event.
• 0x08—D_S_TOV change event.
• 0x10—E_D_TOV change event.
• 0x20—R_A_TOV change event.
• 0x40—Fabric name change event.
Exchange exch-id notified event event-id, with flag:
flag.
The exchange notified whether the Sequence was
successfully sent.
The values of event-id include:
• 0—Indicates the Sequence is successfully sent.
• 1—Indicates the Sequence fails to be sent.
The values of flag include:
• 0x01—The end that sends the request.
• 0x02—The end that sends the response.
Table 9 describes the output fields and messages for the debugging fc configuration packet command.
Table 23 Output from the debugging fc configuration packet command
Field
Description
Received pkttype on isolated interface interface-name. Fabric received packets of the pkttype type on isolated
interface interface-name. The values of pkttype include
BF, RCF, EFP, RDI, and DIA.
Received pkttype from exch: exch-id, with cmdcode:
cmdcode.
Fabric received packets of the pkttype type from
Exchange exch-id. The values of pkttype include BF,
RCF, EFP, RDI, and DIA. The cmdcode field of the
packets was cmdcode.
Sent pkttype to interface interface-name, exch:
exch-id, timer: timer-id.
Fabric sent packets of the pkttype type out interface
interface-name. The values of pkttype include BF, RCF,
EFP, RDI, and DIA. exch-id indicates the Exchange ID,
and timer-id indicates the timer ID of packets.
Sent pkttype SW_ACC to interface interface-name,
exch: exch-id.
Fabric sent packets of the pkttype type to interface
interface-name. The values of pkttype include BF, RCF,
EFP, RDI, and DIA. exch-id indicates the Exchange ID.
Table 10 describes the output fields and messages for the debugging fc configuration timer command.
Table 24 Output from the debugging fc configuration timer command
Field
Description
Failed to start the pkttype timer. Fabric failed to start the timer for requests of the pkttype
type. The values of pkttype include BF, RCF, EFP, RDI,
and DIA.
30