HP Comware 5 Debug Manual Vol 2

in 2 succeeded.
// ESS negotiation succeeded.
# Enable packet debugging for the FC name service in all VSANs. Output similar to the following
example is generated when the name service packets are being transmitted or received:
<Sysname> debugging fc name-service packet
*Feb 22 11:17:21:438 2010 Sysname FCGS/7/PACKET:(VSAN 1): Received GPT_ID frame from Name
Server.
// FCGS received the GPT_ID packets from the name server.
* Feb 22 11:17:53:719 2010 Sysname FCGS/7/PACKET:(VSAN 1): The timer of GE_ID frame timed
out.
// The timer of the GE_ID packets timed out.
* Feb 22 11:17:53:734 2010 Sysname FCGS/7/PACKET:(VSAN 1): Sent GE_PT request frame.
// FCGS sent the GE_PT packets.
FC routing and forwarding debugging commands
The FC exchange module name is identified as "FCEXCH" in debugging messages.
The FC forwarding module name is identified as "FCFWD" in debugging messages.
The FC route management module name is identified as "FCRM" in debugging messages.
debugging fc exchange
Use debugging fc exchange to enable debugging for the FC exchange.
Use undo debugging fc exchange to disable debugging for the FC exchange.
Syntax
debugging fc exchange { all | error | event | packet | timer }
undo debugging fc exchange { all | error | event | packet | timer }
Default
Debugging is disabled for the FC exchange.
Views
User view
Default command level
1: Monitor level
Parameters
all: All types of debugging.
error: Error debugging.
event: Event debugging.
packet: Packet debugging.
timer: Timer debugging.
34