HP Comware 5 Debug Manual Vol 2

debugging fc rm
Use debugging fc rm to enable debugging for the FC route management module.
Use undo debugging fc rm to disable debugging for the FC route management module.
Syntax
debugging fc rm { all | fib | im | static | table | timer } [ vsan vsan-id ]
undo debugging fc rm { all | fib | im | static | table | timer } [ vsan vsan-id ]
Default
Debugging is disabled for the FC route management module.
Views
User view
Default command level
1: Monitor level
Parameters
all: All types of debugging.
fib: Flash module debugging.
im: Interface management debugging.
static: Static route debugging.
table: FIB table debugging.
timer: Timer debugging.
vsan vsan-id: Enables debugging for the specified VSAN. The vsan-id argument ranges from 1 to 3839.
If you do not specify a VSAN, this command enables debugging for all VSANs.
Usage guidelines
Tab l e 13 describes output fields and messages for the debugging fc rm fib command
Table 27 Output from the debugging fc rm fib command
Field
Description
The flash module processed the deleting event
successfully and notified the rm VSAN module.
The flash module processed the VSAN deleting event
successfully and notified the route management
module.
Examples
# Enable the flash module debugging for the FC route management module in all VSANs. Output similar
to the following example is generated when you add a static route in VSAN 1:
<Sysname> debugging fc rm fib
*Mar 10 11:31:46:390 2010 Sysname FCRM/7/FIB: (VSAN 1): Transmitted a route message to
the forwarding queue successfully, entry count: 2.
// FCRM succeeded in sending a route message to the forwarding queue.
# Enable the interface management debugging for the FC route management module in all VSANs.
Output similar to the following example is generated when both ends of a link go up physically:
<Sysname> debugging fc rm im
38