HP Comware 5 Debug Manual Vol 2

*Nov 24 17:49:21:719 2009 Sysname FCVSAN/7/EVENT: Notify the VSAN 2 deletion event
// FCVSAN notified the event of deleting VSAN 2.
*Nov 24 17:49:21:719 2009 Sysname FCVSAN/7/EVENT: Notify the driver of the VSAN 2 de
letion event
// FCVSAN notified the driver of the event of deleting VSAN 2.
*Nov 24 17:49:21:719 2009 Sysname FCVSAN/7/EVENT: VSAN 2 was deleted successfully
// VSAN 2 was deleted successfully.
FC link bundling debugging commands
The FC link bundling module name is identified as "BNDL" in debugging messages.
debugging bundle
NOTE:
Support for this command depends on your device model.
Use debugging bundle to enable FC link bundle interface debugging.
Use undo debugging bundle to disable FC link bundle interface debugging.
Syntax
debugging bundle { all | error | event | packet } fc-bundle [ bundle-id ]
undo debugging bundle { all | error | event | packet } fc-bundle [ bundle-id ]
Default
FC link bundle interface debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
all: All types of debugging.
error: Error debugging.
event: Event debugging.
packet: Packet debugging.
bundle-id: FC link bundle interface number, which ranges from 1 to 256.
Usage guidelines
If you do not specify the bundle-id argument, this command enables FC link bundle interface debugging
for all the FC link bundle interfaces.
If you specify the bundle-id argument, this command enables FC link bundle interface debugging for the
specified FC link bundle interface.
Tab l e 14 describes the output fields and messages for the debugging bundle error command.
40