HP Comware 5 Debug Manual Vol 2

•
The local end has not been assigned to the link bundle.
<Sysname> debugging bundle event fc-bundle
*Nov 12 11:20:48:937 2009 Sysname BNDL/7/Event:
The member interface Fc0/2/1 in bundle 1 is blocked.
// Member interface FC 0/2/1 in FC link bundle 1 was blocked.
*Nov 12 11:20:48:937 2009 Sysname BNDL/7/Event:
The interface Fc0/2/1 joins in bundle 1.
The attributes of Fc0/2/1: speed = 4000000kbps, linkState = DOWN, restriction =
0, DrvMaxNum = 4294967295.
// Interface FC 0/2/1 joined FC link bundle 1.
%Nov 12 11:22:35:734 2009 Sysname IFNET/4/LINK UPDOWN:
Fc-bundle1: link status is UP
// The link layer state of FC link bundle interface 1 is UP.
*Nov 12 11:22:35:734 2009 Sysname BNDL/7/Event:
The attributes of the member interface Fc0/2/1 have been changed.
The attributes of Fc0/2/1: priority = 32768, speed = 4000000kbps, linkState = D
OWN.
// The attributes of interface FC 0/2/1 had changed.
*Nov 12 11:22:35:734 2009 Sysname BNDL/7/Event:
The attributes of the member interface Fc0/2/1 have been changed.
The attributes of Fc0/2/1: priority = 32768, speed = 4000000kbps, linkState = U
P.
// The attributes of interface FC 0/2/1 had changed.
*Nov 12 11:22:35:734 2009 Sysname BNDL/7/Event:
Executing the operation:modify on the bundle 1.
// The selected member interfaces in FC link bundle 1 were being modified.
*Nov 12 11:22:35:734 2009 Sysname BNDL/7/Event:
The member interface Fc0/2/1 in bundle 1 is unblocked.
// Member interface FC 0/2/1 in FC link bundle 1 is unblocked.
FC ping debugging commands
debugging fc ping
Use debugging fc ping to enable FC ping debugging.
Use undo debugging fc ping to disable FC ping debugging.
Syntax
debugging fc ping
undo debugging fc ping
Default
FC ping debugging is disabled.
42