HP Comware 5 Debug Manual Vol 2

FCoE debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging fcoe
Use debugging fcoe to enable debugging for FCoE.
Use undo debugging fcoe to disable debugging for FCoE.
Syntax
debugging fcoe { all | error | event | packet [ fcm | fip ] [ receive | send ] [ interface interface-type
interface-number ] | timer }
undo debugging fcoe { all | error | event | packet [ fcm | fip ] [ receive | send ] [ interface interface-type
interface-number ] | timer }
Default
The debugging for FCoE is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
all: All types of debugging for Fiber Channel over Ethernet (FCoE).
error: Error debugging for FCoE.
event: Event debugging for FCoE.
packet: Packet debugging for FCoE.
fcm: Encapsulated FC packet debugging for FCoE.
fip: FCoE initialization protocol (FIP) packet debugging for FCoE.
receive: Received packet debugging for FCoE.
send: Sent packet debugging for FCoE.
interface interface-type interface-number: Specifies an interface by its type and number. The
interface-type argument can only be VFC. The interface-number argument ranges from 1 to 1024.
timer: Timer debugging for FCoE.
Usage guidelines
If you specify packet without fcm or fip, this command enables debugging for the two types of packets.
If you specify packet without receive or send, this command enables debugging for both received and
sent packets.
If you do not specify the interface keyword, this command enables debugging for all VFC interfaces.
44