Manualshelf

HP Comware 5 Debug Manual Vol 2

ManualsBrandsHP ManualsNetwork HardwareHP HSR6804 Router Chassis
51525354555657585960
*Jan 22 15:09:58:953 2010 Sysname FCOE/7/Packet FIP: T: 1 L: 1
*Jan 22 15:09:58:953 2010 Sysname FCOE/7/Packet FIP: Priority: 128
*Jan 22 15:09:58:953 2010 Sysname FCOE/7/Packet FIP: MAC Descriptor:
*Jan 22 15:09:58:953 2010 Sysname FCOE/7/Packet FIP: T: 2 L: 2
*Jan 22 15:09:58:953 2010 Sysname FCOE/7/Packet FIP: MAC address: 0000-560b-0006
*Jan 22 15:09:58:953 2010 Sysname FCOE/7/Packet FIP: NameIdentifier Descriptor:
*Jan 22 15:09:58:953 2010 Sysname FCOE/7/Packet FIP: T: 4 L: 3
*Jan 22 15:09:58:953 2010 Sysname FCOE/7/Packet FIP: WWN:33:43:2d:46:43:00:0b:00
*Jan 22 15:09:58:953 2010 Sysname FCOE/7/Packet FIP: Fabric Descriptor:
*Jan 22 15:09:58:953 2010 Sysname FCOE/7/Packet FIP: T: 5 L: 4
*Jan 22 15:09:58:953 2010 Sysname FCOE/7/Packet FIP: VF_ID: 1
*Jan 22 15:09:58:953 2010 Sysname FCOE/7/Packet FIP: FC_MAP: 0x0efc00
*Jan 22 15:09:58:953 2010 Sysname FCOE/7/Packet FIP: WWN:48:33:43:2d:46:43:00:0b
*Jan 22 15:09:58:953 2010 Sysname FCOE/7/Packet FIP: FKA_ADV_Period Descriptor:
*Jan 22 15:09:58:953 2010 Sysname FCOE/7/Packet FIP: T: c L: 2
*Jan 22 15:09:58:953 2010 Sysname FCOE/7/Packet FIP: FKA_ADV_Period is: 8000
// FIP descriptor information.
*Jan 22 15:09:58:969 2010 Sysname FCOE/7/Packet FIP: Input FIP packet to FIP queue
successfully.
// FIP packets were successfully assigned to the FIP queue.
# Enable timer debugging for FCoE. Output similar to the following example is generated when an
N_Port connects to a VFC interface and initiates FLOGIN.
<Sysname> debugging fcoe timer
*Jan 22 16:34:30:438 2010 Sysname FCOE/7/Timer: Created VN timer successfully.
// FCoE created VN timer successfully.
*Jan 22 16:34:30:438 2010 Sysname FCOE/7/Timer: Created ENode timer successfully.
// FCoE created ENode timer successfully.
Firewall debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging firewall
Use debugging firewall to enable debugging for firewall.
Use undo debugging firewall to disable debugging for firewall.
Syntax
debugging firewall { all | eff [ dlsw ] | fragments-inspect [ events ] | others | icmp | tcp | udp }
[ interface interface-type interface-number ]
undo debugging firewall { all | eff [ dlsw ] | fragments-inspect | others | icmp | tcp | udp } [ interface
interface-type interface-number ]
48