HP Comware 5 Debug Manual Vol 2

Frame relay debugging commands
The frame relay module name is identified as "FR" in debugging messages.
The output description tables in this document only contain fields and messages that require an
explanation.
debugging fr
Use debugging fr to enable a type of debugging or all types of debugging for the specified interface. If
no interface is specified, FR debugging is enabled globally.
Use undo debugging fr to disable a type of FR debugging or all types of debugging for the specified
interface. If no interface is specified, FR debugging is disabled globally.
Syntax
debugging fr { all | congestion | de | lmi | mfr control | transmit-rate } [ interface interface-type
interface-number ]
undo debugging fr { all | congestion | de | lmi | mfr control | transmit-rate } [ interface interface-type
interface-number ]
Default
FR debugging is disabled.
Views
User view
Default command level
1. Monitor level
Parameters
all: All types of Frame Relay (FR) debugging.
congestion: Congestion management debugging.
de: Discard eligibility (DE) debugging for FR traffic shaping (FRTS).
lmi: Local management interface (LMI) debugging.
mfr control: Debugging for multilink FR bundles and bundled links.
transmit-rate: Debugging for FRTS rate tuning.
interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
Table 1 describes the output fields and messages for the debugging fr congestion command.
64