HP Comware 5 Debug Manual Vol 2

Field
Description
status, full Full report on PVCs. It is sent in response to a full status
inquiry.
status, liv Reply to a LIV request.
ssn Send sequence number.
rsn Receive sequence number.
status dlci = [ulong] Information about PVCs
act Active state of the PVC:
• 1—Active.
• 0—Inactive.
new Indicates whether the PVC is a new one:
• 1—Yes.
•
0—No.
PVCs Number of PVCs for which information is carried.
(up) DTE timeout The DTE has timed out, and the interface is up.
(down) DTE timeout The DTE has timed out, and the interface is down.
(up) DCE timeout The DCE has timed out, and the interface is up.
(down) DCE timeout The DCE has timed out, and the interface is down.
msg illegal Invalid message.
DTE in lmi enquiry The DTE received an LMI request (error).
DCE in lmi reply The DCE received an LMI reply (error).
lmi-type differ The encapsulation of the LMI packet is different from
the one that is configured on the receiving interface.
status len error The length of the status message is wrong.
status enquiry error The status inquiry message is incorrect.
status enquiry len error The length of the status inquiry message is wrong.
bad ANSI msg The format of the ANSI LMI message is incorrect.
report type ID error Report type ID is incorrect.
report type len error Report type length is incorrect.
report type error Report type is incorrect.
liv msg len exceed The length of the LIV message exceeds the limit.
liv ID error Link integrity field ID error.
liv len error LIV length error.
pvc in liv status A PVC field is present in the LIV status message.
pvc ID error PVC status field ID error.
pvc len error PVC status field length error.
overmany pvcs
Number of PVCs in the LMI message exceeds the limit.
illegal DLCI The DLCI in the PVC status field of the LMI message is
illegal.
unknown reason Unknown error occurred during LMI negotiation.
66