HP Comware 5 Debug Manual Vol 2

*0.266083765 RouterA FR/7/debug8: ssn = 1, rsn = 1
*0.266083765 RouterA FR/7/debug8: status dlci = 200, act = 1, new = 0
*0.266083765 RouterA FR/7/debug8: PVCs = 1
// A full status report on PVCs carrying SSN and RSN was received on DLCI 200 on Serial 2/1.
*0.266103750 RouterA FR/7/debug8: LMI: Serial2/1 (out) status enquiry, liv
*0.266105625 RouterA FR/7/debug8: ssn = 3, rsn = 2
// A LIV status inquiry carrying SSN and RSN was sent out DLCI 200 on Serial 2/1.
*0.266104625 RouterA FR/7/debug8: LMI: Serial2/1 (in) status, liv
*0.266104625 RouterA FR/7/debug8: ssn = 3, rsn = 3
// A LIV status report carrying SSN and RSN was received on DLCI 200 on Serial 2/1.
debugging fr mfr control
The output in the following examples is generated when Router A and Router B are connected through
MFR interfaces.
# Enable debugging for MFR bundles and bundled links on Router A and Router B. Output similar to the
following example is generated when you perform one of the following operations:
•
Change the encapsulation of interface Serial 2/0 to a non-MFR encapsulation.
•
Assign interface Serial 2/0 to another MFR bundle.
<RouterA> debugging fr mfr control
*0.266612094 RouterA FR/7/debug8: Serial2/0(out):
*0.266612110 RouterA FR/7/debug8: MFR msg=Remove_link, Length=12, Link=Serial2/0, BL
state=Up
*0.266612110 RouterA FR/7/debug8: E1 00 06 03 06 0E 29 A9 31 07 03 03
// MFR sent out a link disconnection request to remove Serial 2/0 from the current MFR interface. A
message was sent to notify the remote end of the removal of Serial 2/0 from the current MFR bundle.
# Enable debugging for MFR bundles and bundled links on Router A and Router B. Output similar to the
following example is generated when you assign interface Serial 2/0 to MFR bundle 1.
<RouterA> debugging fr mfr control
*0.266617641 RouterA FR/7/debug8: Serial2/0(out):
*0.266617641 RouterA FR/7/debug8: MFR msg=Add_link, Length=30, Link=Serial2/0, BL
state=Down_idle
*0.266617641 RouterA FR/7/debug8: E1 00 01 01 07 4D 46 52 31 00 02 0E
53 65 72 69 61 6C 30 2F 32 2F 30 00 03 06 0E 29 A9 31
// MFR sent a connection setup request to allow Serial 2/0 to process MFR frames.
*0.266617656 RouterA FR/7/debug8: Serial2/0(in):
*0.266617656 RouterA FR/7/debug8: MFR msg=Add_link, Length=30, Link=Seri
al2/0, BL state=Add_sent
*0.266617656 RouterA- FR/7/debug8: E1 00 01 01 07 4D 46 52 31 00 02 0E
53 65 72 69 61 6C 30 2F 32 2F 30 00 03 06 0E 2A 21 BC
// A link setup request was received from the remote end.
*0.266617672 RouterA FR/7/debug8: Serial2/0(out):
*0.266617672 RouterA FR/7/debug8: MFR msg=Add_link_ack, Length=30, Link=
Serial2/0, BL state=Add_sent
*0.266617672 RouterA FR/7/debug8: E1 00 02 01 07 4D 46 52 31 00 02 0E
53 65 72 69 61 6C 30 2F 32 2F 30 00 03 06 0E 29 A9 31
*0.266617688 RouterA FR/7/debug8: Serial2/0(in):
69