Manualshelf

HP Comware 5 Debug Manual Vol 2

ManualsBrandsHP ManualsNetwork HardwareHP HSR6804 Router Chassis
71727374757677787980
*0.425257438 RouterB FR/7/debug8:Serial2/0 DLCI:200 Frf9: Begin negotiation: send first
Mode_1 request
// Negotiation started, and the first mode-1 request was sent.
*0.425257454 RouterB FR/7/debug8:Serial2/0 DLCI:200 Frf9: Mode_1 Request Received
// The response to a mode-1 request was received.
*0.425257454 RouterB FR/7/debug8:Serial2/0 DLCI:200 Frf9: State=initialization
HandShakeStatus=13
// The router was in initialization state, and the handshake state was 13.
*0.425257454 RouterB FR/7/debug8:Serial2/0 DLCI:200 Frf9: Mode_1 Request Received
// A mode-1 request was received.
*0.425257454 RouterB FR/7/debug8:Serial2/0 DLCI:200 Frf9: State=initialization
HandShakeStatus=13
// The router was in initialization state, and the handshake state was 13.
*0.425260422 RouterB FR/7/debug8:Serial2/0 DLCI:200 Frf9: re-sending mode 1 request :NO.
1 times
// The mode-1 request was retransmitted for the first time.
*0.425260438 RouterB FR/7/debug8:Serial2/0 DLCI:200 Frf9: Mode_1 Response Received
// The response to a mode-1 request was received.
*0.425260438 RouterB FR/7/debug8:Serial2/0 DLCI:200 Frf9: State=Operation
// Router B entered the operation status on a successful negotiation.
# Enable FRF.9 Stac debugging on Router A. Output similar to the following example is generated under
the following conditions:
•
Router A and Router B are connected through frame relay.
•
FRF.9 is configured on Router A but not on Router B.
<RouterA> debugging fr compress
*0.764297 RouterA FR/7/debug8:Serial2/0 DLCI:200 Frf9: Begin negotiation: send first
Mode_1 request
// Negotiation started, and the first mode-1 request was sent.
*0.767297 RouterA FR/7/debug8:Serial2/0 DLCI:200 Frf9: re-sending mode
1 request :NO. 1 times
// The mode-1 request was retransmitted for the first time.
*0.770297 RouterA FR/7/debug8:Serial2/0 DLCI:200 Frf9: re-sending mode
1 request :NO. 2 times
// The mode-1 request was retransmitted for the second time.
*0.773297 RouterA FR/7/debug8:Serial2/0 DLCI:200 Frf9: re-sending mode
1 request :NO. 3 times
// The mode-1 request was retransmitted for the third time.
*0.776297 RouterA FR/7/debug8:Serial2/0 DLCI:200 Frf9: re-sending mode
1 request :NO. 4 times
// The mode-1 request was retransmitted for the fourth time.
*0.779297 RouterA FR/7/debug8:Serial2/0 DLCI:200 Frf9: re-sending mode
1 request :NO. 5 times
// The mode-1 request was retransmitted for the fifth time.
73