HP Comware 5 Debug Manual Vol 2
Field
Description
Fail to insert FR switch Inserting a frame relay switch failed.
No buffer available There was a memory allocation failure.
insert map fail, exceed number limit on single pvc FR failed to insert a mapping because the maximum
number of mappings allowed for the PVC was
exceeded.
ip addr added to interface An IP address was assigned to the interface.
ip addr of interface deleted The IP address of an interface was deleted.
ip addr of interface modified The IP address of an interface was modified.
de-encap FR The FR encapsulation on an interface was removed.
FR_IPHC: The length of input packet is too short The length of the input packet was too short.
FR_IPHC: I: Input packet is too long The length of the input packet was too long.
FR_IPHC: The length field of input packet is error! The length field of the IPHC packet was incorrect.
Examples
# Enable frame relay event debugging.
<Sysname> debugging fr event
*0.256187844 Sysname FR/7/debug8: EVENT: Serial2/1 status of physical layer is down
*0.256187844 Sysname FR/7/debug8: EVENT: interface Serial2/1 protocol down
// The physical state and protocol state of the frame relay interface Serial 2/1 went down.
*0.256200641 Sysname FR/7/debug8: EVENT: Serial2/1 status of physical layer is up
*0.256200641 Sysname FR/7/debug8: EVENT: interface Serial2/1 protocol up
// The physical state and protocol state of FR interface Serial 2/1 went up.
*0.256745312 Sysname FR/7/debug8: EVENT: Serial2/1 FR Inarp disabled,
inarp packet discarded!
// Because InARP is disabled on FR interface Serial 2/1, the InARP packets from the remote end were
dropped.
*0.258272859 Sysname-Comware FR/7/debug8: EVENT: Serial2/1 ip addr of interface deleted
// The IP address of FR interface Serial 2/1 was deleted.
debugging fr fragment
Use debugging fr fragment to enable frame relay fragment debugging.
Use undo debugging fr fragment to disable frame relay fragment debugging.
Syntax
debugging fr fragment interface interface-type interface-number dlci-number
undo debugging fr fragment interface interface-type interface-number dlci-number
Default
FR fragment debugging is disabled.
Views
User view
75