HP Comware 5 Debug Manual Vol 2

*Apr 26 13:31:26:674 2007 RouterA FR/7/debug8: IPC/RPC: main board #6 out cfg msg: fr class
*Apr 26 13:31:26:738 2007 RouterA FR/7/debug8:Slot=5; IPC/RPC: io board #5 in cfg msg:
fr ts
// The fr class command was configured and applied globally.
*Apr 26 13:43:57:804 2007 RouterA FR/7/debug8: IPC/RPC: main board #6 out cfg msg:
link-protocol fr
*Apr 26 13:43:57:868 2007 RouterA FR/7/debug8:Slot=5; IPC/RPC: io board #5 in cfg msg:
link-protocol fr
// The link-protocol fr command was applied to the interface board in slot 5.
debugging fr packet
Use debugging fr event to enable frame relay packet debugging.
Use undo debugging fr packet to disable frame relay packet debugging.
Syntax
debugging fr packet [ hex | interface interface-type interface-number [ hex | dlci dlci-number [ hex ] ] ]
undo debugging fr packet [ hex | interface interface-type interface-number [ hex | dlci dlci-number
[ hex ] ] ]
Default
Frame relay packet debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
hex: Hexadecimal data packets.
interface-type interface-number: Specifies an interface by its type and number.
dlci-number: Specifies the DLCI of a virtual circuit, in the range of 16 to 1007.
Usage guidelines
Table 11 describes output fields and messages for the debugging fr packet command.
Table 65 Output from the debugging fr packet command
Field
Description
PACKET: Interface (out), dlci A packet was sent out the particular DLCI on the
interface.
PACKET: Interface (in), dlci A packet was received on the particular DLCI on the
interface.
datagram len Length of the frame relay packet, including the frame
relay header.
pkt type Protocol carried in the frame relay packet.
dlci reserved Reserved DLCI number.
type unrecognized Invalid protocol type.
79